
Draught-proofing: what to seal, and what to leave alone
Stopping a draught is cheap. Blocking the wrong gap is not. The short answer first, then the Engineer's working.
- What is draught-proofing, and what could it save?
- Where do the draughts get in?
- What must I leave alone?
- Do it myself, or pay someone?
Sources checked 18 November 2026. Listed at the bottom of the page.
What is draught-proofing, and what could it save?
A draught is air you did not ask for. Ventilation is air you need. Draught-proofing stops the first and leaves the second alone.
The Energy Saving Trust puts professional draught-proofing of the windows and doors at around £250 for the whole house. Doing it yourself is cheaper; it gives no figure for that.
Those savings are the Trust's own "could save" estimates. The page does not say which house or which prices they are based on, so read them as a guide, not a promise.
Where do the draughts get in?
Finding them costs nothing. Look for daylight under and around doors and windows. Listen for rattles and whistles on a windy day. Feel for moving air. A curtain that moves on its own is telling you something.
Windows that open: self-adhesive foam strip is cheap and easy but may not last; metal or plastic strip with a brush or wiper lasts longer and costs more. The strip has to match the gap: too thick and the window won't close, too thin and the gap is still there. For sliding sash windows foam does not work well: fit brush strip, or ask a professional. For windows that don't open, use a silicone sealant.
Outside doors: a cover for the keyhole, a flap or brush for the letterbox, a brush or hinged flap along the bottom, and strip around the edges.
Floors and skirting: a flexible filler that can move with the boards. Loft hatch: strip, as for a door. Pipework: silicone filler for small gaps, expanding foam for larger ones.
What must I leave alone?
The Energy Saving Trust's list of what not to block or seal:
1. Extractor fans, which take the damp air out of kitchens, bathrooms and utility rooms.
2. Underfloor grilles and airbricks, which help keep wooden joists, beams and floors dry.
3. Wall vents, which let small amounts of fresh air into rooms.
4. Trickle vents above windows, which should normally be left open all the time.
5. Fixed vents for flueless or open-flue gas heaters.
6. Gaps into rooms with an open fire or an open flue, and into kitchens, bathrooms and utility rooms.
7. The gap beneath inside doors, which lets air move through the house.
On a refinery, nobody blocked a vent to stop a draught. It was there for a reason. Same at home.
The Trust also says that if a home has no trickle vents, wall vents or mechanical ventilation, it may already be too airtight, and more draught-proofing may not suit it.
Do it myself, or pay someone?
The Trust says professional draught-proofing is likely to save more Energy. It advises quotes from at least three installers, and points to TrustMark, the government-endorsed quality scheme, for a list of certified ones.
A large crack in a wall is not a draught-proofing job. It may be a sign of something underneath, so ask a surveyor or a builder before anyone fills it.
The next two places to look: the unused chimney and the room thermostat. A draught-free home is comfortable at a lower setting.
More plain-English guides
Written by an Engineer with 40+ years on safety-critical systems. Free to read, sources checked and dated.
Sources
Energy Saving Trust, "Draught proofing" (last updated 18 November 2026): what to seal, what not to block, costs and savings — energysavingtrust.org.uk · checked 18 November 2026
General information only. It isn't a Survey of your home. If you have a gas fire, a gas heater or an open fire, ask a Gas Safe registered Engineer or a chimney sweep before you change the ventilation in that room.